0102030405
High-Quality Precision Filter Elements from China Suppliers & Factory - Micro Filtration with 0.1-500μm Accuracy
Filter Element Introduction
The filter element is a kind of micro filtration equipment installed in the security precision filter. Its filtration accuracy is 0.1-500 μm, which can play a good role in protecting the membrane elements. Often set in the ultrafiltration (UF) backwash pump outlet, nanofiltration (NF), reverse osmosis (RO) device before the inlet of the security filter, intercept the water impurities and large particle matter, to prevent particles into the membrane assembly, scratch the membrane surface.
Filter element is mainly composed of skeleton and filter cloth (PP cotton), mainly polypropylene folding or melt-blown filter element, according to the size of different specifications, according to the size of the filter material aperture has different filtering accuracy.
Equipment Features
-
The pass shape is conical structure.
-
Filtration can enter deep and form deep filtration.
-
Large amount of pollution and long service life.
-
The structure can meet the requirement of quick replacement of filter element.
-
The running flow rate is not more than 10m³/m².h (measured by the surface area of the filter element).
-
Filter precision has a variety of specifications, can provide 0.22 μm, 0.4 μm, 1 μm, 5 μm, 10 μm, 20 μm, 50 μm, 75 μm, 100 μm and other different precision of the filter element.
Conditions of Use
-
Security filter design pressure: Less than 0.4Mpa.
-
Water pressure test pressure: 0.8MPa.
-
Design temperature: 0℃-50℃.
-
Service life: Under normal working conditions, the filter element can maintain the service life of about 4-8 months.
Scope of Application
It is suitable for further purification of water with low suspended impurities (turbidity less than 2-5 degrees).
Frequently Asked Questions
Q: What is the filtration accuracy of the filter element?
The filtration accuracy of the filter element ranges from 0.1 to 500 μm. It is available in various specifications, including 0.22 μm, 0.4 μm, 1 μm, 5 μm, 10 μm, 20 μm, 50 μm, 75 μm, and 100 μm.
Q: Where is this filter element typically installed?
It is installed in the security precision filter, commonly set at the ultrafiltration (UF) backwash pump outlet, and before the inlet of nanofiltration (NF) and reverse osmosis (RO) devices.
Q: What materials make up the filter element?
The filter element is mainly composed of a skeleton and a filter cloth (PP cotton), typically using polypropylene folding or melt-blown filter elements.
Q: What is the typical service life of the filter element?
Under normal working conditions, the filter element can maintain a service life of approximately 4 to 8 months.
Q: What are the design pressure and temperature limits for usage?
The security filter is designed for a pressure of less than 0.4Mpa (with a water pressure test limit of 0.8MPa) and a design temperature range of 0℃ to 50℃.
Q: What water conditions are suitable for this filter element?
It is suitable for the further purification of water with low suspended impurities, specifically where the turbidity is less than 2-5 degrees.




